600 WATTS Installation PA Power Amplifier

APA-480

600 WATTS

Installation PA Power Amplifier

1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Instant transfer to DC power (Car Battery) if AC power fails.

Power Output	750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD
Output Regulation	? 2 dB, no load to full load at 1kHz
Input Channels	1 × 200mV/470k? (unbal.), 2 × 1V/50k? (bal.), 1 × 100V Input/50k?
Frequency Response	50-15,000Hz ±3dB
Signal to Noise Ratio	60dB
Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs	Loop through 1 × 200mV/600W, 2 ×1V/1kW
Speaker Outputs	4?, 8?, 70V & 100V
Power Supply	AC: 220-240V 50/60Hz?DC: 24V (2×12V Car Battery)
Power Consumption	AC: 1200VA?DC: 15A
Dimensions	W485 × H142 × D510 mm
Weight	32.20kg

There are no reviews yet.

Be the first to review “600 WATTS Installation PA Power Amplifier”