325 WATTS Installation PA Power Amplifier



Installation PA Power Amplifier

  • High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc.
  • 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
  • 100V input is provided for connecting another amplifier’s output in long line applications.
  • Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
  • Resettable circuit breaker for protection against overload and short circuit.
  • Loop through output for connecting another booster amplifier.
  • 19” Rack mountable chassis.


Power Output 415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation ? 2 dB, no load to full load at 1kHz
Input Channels 1 × 200mV/470k? (unbal.), 2 × 1V/50k? (bal.), 1 × 100V Input
Frequency Response 50-15,000Hz ±3dB
Signal to Noise Ratio 60dB
Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW
Speaker Outputs 4?, 8?, 70V & 100V
Power Supply AC: 220-240V 50/60Hz?DC: 24V (2×12V Car Battery)
Power Consumption AC: 600VA?DC: 7A
Dimensions W485 × H142 × D405 mm
Weight 20.6kg


There are no reviews yet.

Be the first to review “325 WATTS Installation PA Power Amplifier”

Your email address will not be published. Required fields are marked *