2-Zone-Panel

Product decoration and look may differ from the image displayed.

Fire Alarm Control Panel(RE-102-2 Zones)

Ravel Indian Manufacturer, International standard.
Switch Mode Power Supply.
Modular Construction, Serviceable.
Surface Mount Technology.
Battery polarity & deep discharge protection.
As per IS -15908: 2011 Standard.
16 X 2 Dot Matrix LCD Display.
Standby battery backup with built in charging.
Fire / Fault status in unambiguous colored LED indication.
Switch Mode Power Supply.
Tactile Keypad for easy panel operation.
System on indication.
Main, Standby status indication.
Low Battery visual warning with audible tone.
Relay output for actuators for Fire and Fault.
Lamp Test facility
Zone wise one man walk Test Facility.
Zone wise Isolation facility with loop voltage cut off.
Compatible to all type of Conventional Detectors.
Optional Zone Wise Sounder / Zone Wise Contact.

Categories: 2 Zone Panel, Fire Fighting System

Description
Reviews (0)

Description

Electrical Specification

Primary Power 120 – 220VAC , 50 Hz	Common Relays Type : Form C No of Relays : 3 Relay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @125VAC. Power Factor : 1
Standby Power 24V D.C (2 Nos of 12v, 7Ah Sealed Lead acid battery). Quiescent current : 55mA
Operating Condition Operating Temperature : 0 – 49° C/32-120° F. Relative Humidity : 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.	Initiating Device Circuits (Zone Circuit) All zones are Class B wiring Normal Operating Voltage : 14- 21 VDC Alarm Current : 15 – 30mA Short Circuit Current : 42mA Maximum Loop resistance : 50 ohms Maximum End-Of-Line Resistor : 4.7K, 1/4watt Standby Current : 6.8mA (2.4mA for Detectors)
Charging Circuit Charging Voltage 28.2V, ±0.5V Charging Current 0.5 A (Max.).
Notification Appliance Circuits Class B wiring Operating Nominal Voltage : 24VDC Current for NACs : 0.6 Amp End-Of-Line Resistor : 4K7, 1/4 watt

Mechanical Specification

Dimensions	:	(350W X 250H X 100D)
Color	:	Red / White
Construction	:	18 Gauge (1.22mm) CRCA sheet with powder-coated Finish
IP Rating	:	IP50
Cable Entry	:	11xø19mm Knockout in top of the cabinet

Ordering Information

Model	Description
RE-102-W	2 ZONE Fire Alarm Panel
RE-102-R	2 ZONE Fire Alarm Panel

Note:
R- Red Color, W-White Color

Compatible Devices

Model	Description
RE-316S-2L	Photoelectric Smoke detector with base.
RE-316H-2L	Heat detector with base.
RE-316SH-2L	Photoelectric & Heat detector with base

Reviews

There are no reviews yet.

Be the first to review “Fire Alarm Control Panel(RE-102-2 Zones)”